T-moulding edge trim

Description

T-Molding is the plastic decorative edge trim that is placed on the outer edges of the cabinet both to protect and make more attractive the finish.

Length: sold by the meter – we have long lengths available, when you place an order we’ll cut a single length to match.
Width choices: 19mm and 16mm (a tolerance of ±0.5 mm)

Material: PVC plastic

Provides a tight seamless fit to the edge of the panel
Easily manages a tighter radius than non-pretension profiles

Please note:

Moldings tend to become a bit stiffer in colder weather – we recommend gently warming them up either by placing them in the sun for a while or with some heat from a hair dryer – just be careful to go slowly and check often.

Use a slot cutting router bit to cut a ~3mm groove in your cabinet, then gently tap this t-moulding into place using soft faced mallet.