KDit Noise Reducing Pads

Description

These felt pads are perfectly cut for you to install in your 24mm or 30mm Sanwa OBSF, OBSJ or OBSC to help reduce the noise when you fully press the button. Similar to foam pads from other manufacturers. NOTE: both sizes are sold in packs of 10

To install you need to separate the plunger from the rim. To do this gently push in the clips on each side of the button rim. I prefer to use a soft plastic or wooden tool to avoid scratching or damaging the plastic.

Sometimes you might need 2 tools so that you can do both sides at the same time. Take care, do this slowly and carefully. Eventually you’ll get both clips retracted fully, then you can pull the plunger out. You’ll see small slits in the plunger that you can get a fingernail into that will help with grip.

Now just drop the pad into the button rim.

And whilst holding the rim upright install the plunger. Take care to line the clips up with their recesses and push the plunger home. It will click in to place.