Description
A quality Japanese made conversion harness that you can use to swap from joystick/lever control to 4 individual direction buttons. Just unplug the joystick then plug this harness into the 5 pin female Sanwa/Seimitsu loom and connect up the 4 individual direction buttons. The female spade connectors are 2.8mm (0.110″), suitable for connecting to most 24 or 30mm push buttons that have 2 x 2.8mm (0.110″) male spade terminals.
Note that this cable is functionally equivalent to the Brook Hitbox cable and can be used instead.
The red, orange, yellow and green wires are about 30cm long and the black wire has the first spade connector at the 18cm mark then each link in the chain is about 8cm.
Typically orange is up, red is down, yellow is left and green is right but you’ll need to check your setup.
Reviews
There are no reviews yet.